- Grooming & Beauty
- Tools & Outdoors
Turk One-Piece Forged Iron Fry Pan
This particular fry pan is produced by an open-die hot forging process, completely formed from one piece of iron. This process gives it a seamless handle-to-pan structure, a uniquely formed surface, and a very fine quality that portends longer life.
The forged iron skillet has a continuous grain throughout, which comes from heat shaping (literally, a process of heating at 1000 degrees C, then striking the metal with a hammer until it meets the intended shape). The continuous grain of the iron makes the pan get hot faster than cast iron, and it stays hot, allowing food cooking on its surface to stay tender inside and form a crispy outer skin. This makes it an ideal pan for cooking meat.
Forged iron is also longer-lasting than cast iron, which is formed by pouring hot iron into a cast mold. If you drop a cast iron pan, it can break into two pieces. Forged iron won't.
Many recipes that call for roasting a dish in the oven will also mention the alternative use of an iron pan, for which the forged fry pan also works. Casseroles, pancakes, vegetables and fried chicken, eggs and biscuits. It can all go right from the stovetop to the oven in this pan. And after that’s done, you can still put it back in the oven and use it again.
Use & Care
Iron is very simple to maintain. Basically, with a brand new iron pan, you prepare the pan for cooking by seasoning it, after which cleanup and soap will not be necessary. And if kept well, you'll be passing it on to your grandkids.
A brand new iron skillet requires simple start care before you're ready to cook, and a few rules of maintenance in order to make the pan last forever (which it really can). Here are the things you should know:
Never put the pan in the dishwasher or run cold water on the hot pan. This can shock the pan and cause fissures or even warp the pan. After use, allow it to cool slowly before rinsing with hot water.
As you heat the pan, the handles will become very hot! Use caution and always make sure you have an oven mitt or towels to cover the handles when you're cooking.
To season your skillet:
The forged iron skillet only requires soap once in its lifetime: when it's brand new, before you season it. The seasoning process is a must. It protects the pan from rust, creates a nonstick surface, and is necessary before you start cooking.
Starting with a brand new, unseasoned skillet, wash the pan with soap. You can use Castile or simple dish soap. And then never wash with soap again.
Rinse the skillet with hot water to remove all the soap.
After cleaning, make sure the pan is completely dry and smooth. You can heat it up on the stovetop if you want to ensure all moisture has been removed.
Using cooking oil such as soybean, safflower or canola oil (don't use low-smoke oils like olive or butter), apply it over every part of the skillet.
Bake. Set the oven 350-400 F and place the cookware upside down on the top rack of the oven. Bake the cookware for at least an hour. You can place aluminum foil underneath the pan to avoid drippings getting on the heating element. Then turn off the oven and allow the cookware to cool (for several hours) to room temperature in the oven.
Store. Put in a cool, dry place. Thinly coat the cookware with cooking oil in-between uses to maintain seasoning.
If your pan comes with a coating, simply wash it with warm water and a bit of soap before first use. This is an all-natural olive oil coating, which protects your pan from rust.
Production & Design
Since 1857, Turk has been manufacturing "Open-die hot forged" - formerly also called "handforged" - pans out of one piece, for skilled cooks and chefs who know their excellent characteristics and do not want to do without their advantages.
The company started with Albert Karl Turk, who installed a hammer plant on the mill of his father-in-law. Shovels and pans were manufactured here using the sledgehammer and the products became well known beyond the local region where they were produced. Two world wars and a serious fire later, the business was passed down to Hans-Peter Turk, a fifth generation Turk who employs 40 craftsmen to make 1,000 items a year.
Of the 40 employees, there are just 3 blacksmiths who forge the pans. At 1000 degrees Celcius, the handle of the pan is first stretched from a block of iron, then the pan body is spread. With a heavy hammer, the pan is beaten out to meet its intended shape. To make one pan, there are ten steps involved of heating and shaping.
The whole pan is considered a piece of art by the metal craftsman who works it, and every pan comes out a unique item.
9.5" top diameter, 6.7" bottom diameter, 10" handle
Weighs approximately 2.86 lbs
11" top diameter, 7.9" bottom diameter, 10" handle
Weighs approximately 3.31 lbs
12.5" top diameter, 9.8" bottom diameter, 13" handle
Weighs approximately 4.63 lbs
100% open-die hot forged iron
ALSO AVAILABLE High-Edge Criss-Cross Forged Iron Fry Pan Criss-Cross Iron Fry Pan